March 2011 Archives

We just started JR official face book and official Twitter.
*Japanese language only

Official face book
http://www.facebook.com/jr.propo

Official Twitter
https://twitter.com/JR_PROPO

FBL Rotor Head developmental status

Attached is a picture of FBL Rotor Head for VIBE50NEX we are working on now.

As this is just a prototype, the specifications may be slightly changed when we actually release it.

Please wait for a while. 

fbl50_sample.jpg

 

FBL pitch gauge is included.

fbl_pitch_scale2.jpg

 

[New Products] SYLPHIDE E12

The width of the spiral drive gear supplied the Sylphide E12 is greater than the ones used in 90-class GP helicopters. This boosts gear strength and reduces noise.
Special carbon frames allow more flexible power system choices. The model includes many newly designed parts such as a 12mm mast, ASG rotorhead, and tail gear case "ASG tail gear case v2" which correspond with the new F3C rules, allowing the Sylphide E12 model deliver flight performance like never before.

sy12.jpg

SYLPHIDE E12 ASSEMBLY KIT
No.88266
Motor, ESC, Battery, Main rotor blades, Paddles and Tail rotor blades are not included.

Overall length : 1,402mm
Overall width : 182mm
Overall height : 426mm
Gross weight : 5,200g or more(excluding main rotor blades)
Main rotor diameter : 1,605mm(with 720mm main rotor blades)
Tail rotor diameter : 288mm
Tail Drive System : Belt
Swash type : 120 CCPM


Gear Ratio and Motor KV Value
Battery Pinion Gear Ratio Guideline of KV
12Cell T10 11.5:1:4.79 520?560
T11 10.45:1 500?520
T12 9.58:1 450?500
T13 8.85:1 440?450


sy_head.jpg

sy_fr.jpg

sy_fl.jpg

tail.jpg

[New Products] AIRSKIPPER E12

This kit has been designed and is based on the Airskipper 90CE.
The carbon lower frame for electric exclusive use is designed.
This is suitable for 90 class beginners.
Helical gear and FRP body are included.

ase12.jpg

AIRSKIPPER E12 ASSEMBLY KIT
No.88267
Motor, ESC, Battery, Main rotor blades,
Paddles and Tail rotor blades are not included.

Overall length : 1,421mm
Overall width : 182mm
Overall height : 442mm
Gross weight : 5,300g or more(excluding main rotor blades)
Main rotor diameter : 1,605mm(with 720mm main rotor blades)
Tail rotor diameter : 288mm
Tail Drive System : Belt
Swash type : 120 CCPM


Gear Ratio and Motor KV Value

Battery Pinion Gear Ratio Guideline of KV
12Cell T9 10:1:4.7 500?520
T10 9:1 440?450
10Cell T9 10:1 560?630
T10 9:1 500?560


as_head.jpg

as_fr.jpg

as_fl.jpg

tail.jpg

2011 ROTOR LIVE

The RC Magazine ROTOR organized the 1st ROTOR live on 12-13th/March 2011 at the racecourse at 76473 Iffezheim, near Baden-Baden.

IMG_7717.jpg IMG_7707.jpg SDC10841.jpg

Photos by AKMOD

2011 Australian Toy hobby & Nursery Fair

2011 Australian Toy hobby & Nursery Fair was held in  Melbourne on 8th-11th/Mar.

01_OMP_booth.JPG 07_JR.JPG 15_JR_NexE8.JPG

Photos by Jamie Nancarrow from O'Reilly Model Products

The booklet of JR XG-7

xg7.jpgYou may able to down load the booklet of JR XG-7 transmitter on our web site now.

This simply explains how DMSS systems are designed and how Telemetry system operates.

Download [PDF/5.31MB]

VIBE 50NEX MOVIE

 VIBE 50NEX

Rotor Head: Standard
Main Rotor: Radix600SB
Tail Rotor: JR Carbon 82mm
Paddle: Standard
Engine: OS MAX55HZ YPER
Muffler: HATORI 56NS-3D
Fuel: KLOTZ RED SPECIAL 25-23
Gyro: G770T/MP80G
Radio: XG8(DMSS)

Pilot: Hiroki Ito (Team JR)

VIBE 90SG(FBL) MOVIE

VIBE 90SG

Radio: DSX11
Rotor Head: Flybarless
Pilot: Hiroki Ito (Team JR)
Data: 2.March.2011

To whom it may concerns

As you may know, we had huge earthquake in Japan.

Northern part of Japan where close to the epicenter has severely damaged due to this earthquake and Tsunami.

We at JR headquarter in Osaka and Helicopter division in Matsusaka have no damage to the building or our staff,  we are operating as usual.

However, due to such disaster, we have several reports from freight forwarder that there might be some delay in shipment because of the transportation delays and priority shipment of aid supply for the disaster victims.so, you are kindly requested to understand the situation and be patient for a little while.

Thank you for your kind concerns towards Japanese people here.

Kind regards,
JR PROPO

[Event] ROTOR live

logo_480.jpg

The RC Magazine ROTOR organize the 1st ROTOR live on 12-13th/March 2011 at the racecourse at 76473 Iffezheim, near Baden-Baden.
There will be many products displaying and a lot of demonstration  flights going.

Our distributor in Switzerland will have a big booth there.
And JR pilots, Uwe Kiesewetter and Florian Stumpf will be doing a demonstration flight.
Also Andy san from AKmod will do a seminar how to set-up the radio for F3C.

For more information, please visit here.

A New JR Pilot

We would like to introduce a new JR pilot from France, Mr.Arnaud POYET.
He was a member of France national team for Europe Championship last year.
And of course he is going to the World Championship in this year.

110308news01.jpg

110308news02.jpg

110308news03.jpg

Vibe90SG Night Flight

Here is a movie from Chen Zarfati, Team JR.
His night flight at a funfly event held on 19th/Feb.





The equipment is:
JR Vibe SG nitro, OS HZR 91 + MP5 muffler, JR HV servos including
prototype HV tail servo, Total G and Radix blades.

Enjoy !

[New Products] Accessories

The following items are now available.



61583.jpg JR NUT DRIVER 5.5MM
Jan Code: 4944013 615836

For tightening the Nylon Lock Nut M3 etc.


61584.jpg JR NUT DRIVER 7MM
Jan Code: 4944013 615843

For tightening the Nylon Lock Nut M4 etc.


61598.jpg JR HEX DRIVER 4.0MM
Jan Code: 4944013 615986

Best driver for tightening the Button Head Bolt M6 etc used for ASG Main Rotor Head 90 etc.


SPARE BIT FOR HEX DRIVER 4.0MM
Jan Code: 4944013 706510



JR original driver with JR PROPO logo.
Grip part is black anodized with helical cut and by having a cap on the edge of the grip,it turns smoothly.

[New Products]OFFSET BATTERY MOUNT

61599.jpg OFFSET BATTERY MOUNT
Jan Code: 4944013 615997

This is an optional Battery Mount for the SY-E12.
By using this product, you will be able to install your battery about 10mm lower than the standard position.

English page redesigned

English website has been redesigned.

URL for our website has been changed.
Please go to the below web link for the new URL top page.

http://www.jrpropo.co.jp/english/

If you have ever book-mark our previous URL, please change the address accordingly.

About this Archive

This page is an archive of entries from March 2011 listed from newest to oldest.

February 2011 is the previous archive.

April 2011 is the next archive.

Find recent content on the main index or look in the archives to find all content.