The new frame has been designed to allow easy installation of motor, battery and ESC. Your choice of CCPM 120 or 140-degree swash. Includes FRP canopy, painted in three colors.Shaft driven tail with robust tail box and gears to handle the most extreme 3D flying. Highly tunable head design for extreme cyclic response.
Each tail rotor grip contains dual radial bearings, plus a thrust bearing - providing smooth and precise operation. Carbon horizontal and vertical tail fins.
VIBE NEX E8 (FBL) Machined aluminum flybarless rotor head is standard equipment. FBL pitch jig included.
VIBE NEX E8 (with Flybar) Machined aluminum rotor head is standard equipment. Flybar paddles included.
SPECS
VIBE NEX E8 (FBL)
| Length | : | 1,225mm / 48.23in |
|---|---|---|
| Height | : | 421mm / 16.57in |
| Width | : | 212mm / 8.35in (Landing strut) |
| Main Rotor Dia. | : | 1,361mm / 53.58in (with 600mm rotor blades) |
| Tail Rotor Dia. | : | 268mm / 10.56in |
| Gear Ratio | : | 8.7 : 1 : 4.4 |
| Gross Weight | : | 2,750g / 6.06lb or more (not including main rotor blades) |
| Swash type | : | 120/140 CCPM |
VIBE NEX E8 (with Flybar)
| Length | : | 1,225mm / 48.23in |
|---|---|---|
| Height | : | 431mm / 16.97in |
| Width | : | 212mm / 8.35in (Landing strut) |
| Main Rotor Dia. | : | 1,361mm / 53.58in (with 600mm rotor blades) |
| Tail Rotor Dia. | : | 268mm / 10.56in |
| Gear Ratio | : | 8.7 : 1 : 4.4 |
| Swash type | : | 120/140 CCPM |
ADDITIONAL ITEMS REQUIRED
- A complete radio system capable of 120 degree or 140 degree CCPM
- 3 Axis Gyro System(TAGS01 etc)
- Main rotor blades
12mm thick grips
Bolt hole 4mm
Length 600mm
*wooden rotor blades are unusable - Brushless Motor
Approximately 740KV [8cell]
Approximately 500KV [12 Cell] - ESC 100A or greater
- Lithium-Polymer Battery
4 Cell-4,400mAh (x2)
6 Cell-3,300mAh (x2) - Battery Connector Pins
- Battery Charger
- Lead harness
Gold, 60-core 150 LG (150mm)
(Several may be required)
LINE UP
Assembly kit w/3 Axis Gyro System TAGS01
No.98050 Jancode 4944013 980507
Assembly Kit without Gyro
No.98051 Jancode 4944013 980514
VIBE NEX E8 (with Flybar) Assembly Kit
No.98048 Jancode 4944013 980484
*Motor, Speed Controller, Battery, Main Rotor Blades and Servos are not included in the kit.
Please refer to VIBE NEX E8 Support page for the recommended products and How to set up.
VIBE NEX E8 Support page
http://www.jrpropo.co.jp/english/heli/e8/
